On June 17th 2020 ACS gives a Webinar session "State of the Art & Novel Trends in the Ultrasonic Testing of Concrete Structures" in cooperation with our Indonesian partner PT Testindo for over 200 participants.
SUBSCRIBE to news on product updates of ACS
Safety has top priority in aerospace. In order to guarantee that important structural carbon fiber parts are defect-free, appropriate quality control is required. A common technology used to inspect the integrity of parts is ultrasonic testing. However, the inspection process is difficult to automate, given the complex part structures that are present in many situations. Strong curvatures and high wall thicknesses put challenging requirements on the inspection procedure. Project SonicScan is dedicated to lift automated ultrasonic inspection to the next level. In the context of project SonicScan, Acoustic Control Systems – ACS Group in collaboration with Profactor is developing an automated robotic work-cell for ultrasonic inspection.
Important for the ultrasonic testing of parts is that all regions of a part are actually covered. Therefore, the ultrasonic transducer must travel across the part’s surface at a defined distance. In order to execute this motion with an industrial robot, multiple things need to be taken into account: propagation of the ultrasonic signal, geometry of the part, shadowing, accessibility, and spacing between part and test head. To solve such a complex path-planning problem, project partners develop special software.
Ultrasonic testing enables a view into carbon parts.
This project has received funding from the Clean Sky 2 Joint Undertaking (JU) under grant agreement No 831830. The JU receives support from the European Union’s Horizon 2020 research and innovation programme and the Clean Sky 2 JU members other than the Union.
The new application software for visualization and processing data from the UPVT instrument A1410 PULSAR for viewing the UPVT measurement results in waveform and digital form can be now downloaded free of charge in GooglePlay Store. Among others, the evaluation of concrete compressive strength by SonReb method according to all the valid international standards is implemented.
On April 1st 2019 Acoustic Control Systems in consortium with PROFACTOR GmbH, Austria have started a research and development project SONICSCAN (Clean Sky 2 Joint Undertaking (JU) under grant agreement No 831830 in scope of the European Union’s Horizon 2020 program).
The project aims at developing innovative NDT methods based on ultrasonic tomography that are suitable for production testing primary structural parts. To address this problem the project builds upon the modern Phased Array technology that allows the tomographic inspection of parts and combine it with a robotic handling system to move the sensor across the part.
Link to the project web page: http://sonicscan.eu/
From 11th to 15th of June 2018 in Goteborg in Swedish Exhibition & Congress Center 12th European Conference on Non-Destructive Testing (ECNDT 2018) will take place.
The conference will be held in the format of sections in which the participants will be acquainted with the reports submitted for all NDT methods. Our specialists will present information on the latest developments and scientific researches of our company.
In the framework of the conference will be held an exhibition and we are pleased to invite you to visit our booth where the company Acoustic Control Systems will present the whole range of manufactured products, including the latest developments.